Prefinished UV Plywood

If you're passionate about woodworking but dislike the hassle of applying a finish, consider using prefinished UV plywood for your next project. It not only saves time but might deepen your love for woodworking. Plony Industries carry ready stock for prefinished UV plywood with natural top and bottom veneer.

Here’s all you need to know about UV plywood.

What is Prefinished UV Plywood?

Prefinished UV plywood is plywood coated with a UV-curable resin that hardens when exposed to ultraviolet light, resulting in a durable finish. It's often used in cabinetry and is ideal for projects requiring a sleek, professional appearance.

Advantages Of Prefinished UV Plywood

While prefinished UV plywood costs more than unfinished plywood, its advantages make the expense worthwhile. Here are the main reasons to choose it for your upcoming woodworking project:

Time-Savings

One significant benefit of UV plywood is the time it saves. Finishing wood typically requires a lot of time, including sanding, re-sanding, and applying several coats, even for minor projects. Using UV plywood, you just need to cut, glue, and appreciate your work, as the finish is pre-applied, sparing you hours or even days of labor.

Increased Durability

UV plywood is more durable than most self-applied finishes. The UV-curable resin forms a hard, protective layer that resists scratches, dents, and wear, making it ideal for applications where durability is crucial, like cabinets.

Convenience

UV plywood is simple to handle, making it ideal for projects with tight deadlines or for beginners in woodworking. Just cut the pieces to the desired size and glue them together.

Whether you're building kitchen cabinets or a contemporary coffee table, UV plywood provides an easy and uncomplicated method.

Sleek and Glossy Finish

UV plywood offers a polished, professional finish that is challenging to replicate using other techniques, particularly for novices. The glossy surface elevates any environment and ensures your woodworking projects are eye-catching.

No Inhalation of Harmful Vapors

As wood finishes dry, they often emit vapors that can be dangerous to breathe in, requiring a workspace with good ventilation. UV plywood resolves this problem because its finish is already cured, enabling indoor work without the concern of harmful fumes.

Can UV Finished Plywood Be Painted?

Indeed, UV plywood can be painted. Begin by lightly sanding the UV finish with 220-grit sandpaper, then apply a coat of primer. After the primer has dried, proceed to paint over the UV finish just like you would with raw plywood. Painting is an excellent way to alter the color of your UV plywood. Adhere to these steps for optimal results. We provide a selection of natural wood species veneer such as Oak, Black Walnut and Teak to give your project the natural look that you desire for your project.

Is UV Finished Plywood Waterproof?

No, UV plywood is not waterproof. While it can resist minor spills and splashes, avoid excessive moisture to prevent damage. It’s not suitable for water-based applications like boat building.

Cutting and Working on UV Plywood

Cut UV plywood in the same way as unfinished plywood, but take steps to safeguard the finish.

1: Keep Your Tools Sharp

Ensure your cutting tools are sharp to prevent damage to the UV plywood finish. A dull blade can cause tear-out and harm. Investing in sharp tools will help you avoid potential issues and costs.

2: Keep Your Tools Clean

Clean tools help prevent scratches and damage to the UV plywood finish. After using tools, wipe them with a dry rag and clean them thoroughly before working with UV plywood. Consider vacuuming or blowing off tools between cuts.The cleaner your tools, the less chance there is of damaging the finish.

3: When In Doubt, Use Painters Tape

Apply painter’s tape across each plywood sheet to protect the UV finish and prevent scratches. While it might seem tedious, it’s beneficial to prevent damage. Use high-quality tape that adheres well and leaves no residue. Additionally, apply tape over cut-lines to minimize tear-out. This technique also works for unfinished plywood.